triumph won't kick over...

Replies to This Discussion

Permalink Reply by Blue Collar Moto on May 12, 2009 at 1:29pm

You may have to make a bushing to take up the slack. Have you re adjusted the clutch? How much slack is in the cable?

• ▶ Reply

Permalink Reply by El Pomp on May 13, 2009 at 3:06am

the cable only has slack in it cause i undone the cable from the lever thinking that may have been the cause of the clutch being engaged. if hooked back up the cable doesnt have slack.

• ▶ Reply

Permalink Reply by gary boon bignell on May 17, 2009 at 2:47pm

check your clutch centre hasnt come apart .the cush drive plate screws can come out,they did on my beeza ,just got home with a slipping clutch.i ended up putting m6 counter sunk bolts right through .still holding eight years latter no prob.maybe this will help mate.

• ▶ Reply