Speedo on sporty

Replies to This Discussion

Permalink Reply by Roach on February 22, 2009 at 7:25pm

Nothing very cheep, you can rig a drive off the rear wheel so you can use a small chopper speedo, other wise, if you use the trans unit, you have to use Dakota ditigdle, they have a interface box that you can hide and a small speedo/tack thats a little biger than a bullit lite, Ive put many on choppers, not cheep, but nice...Roach.

• ▶ Reply

Permalink Reply by JohnnyRotten on February 3, 2010 at 7:31pm

I think the 01 sporty engine has a electronic speedo output on the tranny, My 99 does. One wire is the neutral switch and one is speedo, green I think.

• ▶ Reply

Permalink Reply by JohnnyRotten on February 3, 2010 at 7:36pm

I think it will work with the cheepo drag specialties or similar ones

• ▶ Reply

Permalink Reply by Shovithead on December 9, 2010 at 3:27pm

Get a early style wheel drive unit and a matching cable, install on front or rear, but get the right size tire style.  Some wheels don't have the notch for the drive, but that is a easy fix.  Look the drive units and cables in any aftermarket book, then get a speedo to match.  Or just go slow.

• ▶ Reply

Permalink Reply by Dan Henriksen 10 hours ago

Motorcycle Storehouse B.V.

this speedo looks great and is cheap...works with any electronic sensor....on wheel or trans.... speedo is only 48mm in diameter.

• ▶ Reply