need some help with my windows

Replies to This Discussion

Permalink Reply by el diablo on March 26, 2009 at 6:23pm

it's normaly bolted or screwed into place
check on the top of the door and just below the window
or lower the window and pull back the seal ....the screws might be behind there !!

it's diff. on every car or van ,but the system is pretty much the same

good luck

• ▶ Reply

Permalink Reply by Justin Martin on November 18, 2009 at 6:29pm

I had a 66 chevy and there was a screw in the top of the door and you took the bottom panel off and there was another bolt at the bottom in the door.

• ▶ Reply

Permalink Reply by Justin Martin on November 18, 2009 at 6:29pm

I had a 66 chevy and there was a screw in the top of the door and you took the bottom panel off and there was another bolt at the bottom in the door.

• ▶ Reply

Permalink Reply by Roach on November 21, 2009 at 7:50pm

yeah, I had to change out the whole assembly on my 67, screwd in top frame and screwd in side dorr panle, the widow glass has to be taken out first, and thats a bitch!!

• ▶ Reply