Choppertown Nation - Online Community for Backyard Builders

Custom motorcycles, hot rods, skate, art, music, movies, whatever...

Guys I have a narrow glide frontend I bought off of CL it has air fitting. I was told it came off a 99 narrow glide sport. It is in really good shape EXCEPT it won't hold air. I was told these came on sportsters also but my manual says nothing about these. Can it be used as is and how hard is it to replace those air seals. Thanks, Ralph

Views: 3

Reply to This

Replies to This Discussion

You have to get the book for the sportster S, it will have the info you need, other wise, yeah, new seals are in order, dont go over the 15 psi.....Roach.
Thanks I think I fucked'em up myself I put air in them with my compressor minus a regulator, so dumbass me shot about 40 lbs into'em in abpout 2 seconds. Thanks again

RSS

The Choppertown Nation Meetup was amazing!

Huge thanks to our sponsors!

Want to be a sponsor? Write to us!

© 2012   Created by Zack.

Badges  |  Report an Issue  |  Terms of Service